Case Study: Pond Slopes Vegetation

Posted on Tue, May 16, 2017

 A common issue with pond slopes in the greater Houston area is loss of adequate vegetation. Quality vegetation is vital to maintaining a functioning slope as a quality root structure is what keeps all dirt in place.  Langham Creek YMCA was approaching their deadline for their annual Stormwater Quality permit renewal. Being their stormwater consultants for the property, we advised them of the challenges they were experiencing. The issues were lack of adequate vegetation in various areas of their SWQ pond as well as excessive rilling and erosion on the slopes. These conditions would prevent the Engineer from certifying that the pond was in compliance with Harris County regulations and would prevent them from renewing their annual Stormwater Quality permit.

Read More

Tags: Pond Stabilization, slope stabilization, hydraulic erosion control, vegetation, harris county stormwater regulations, stormwater quality permit renewal, harris county stormwater quality permit

Detention Ponds: Life After Construction

Posted on Mon, May 15, 2017

Read More

Tags: Stormwater Quality Management Plans (SWQMP), detention and drainage, detention basin maintenance, detention ponds

Stretch Your Street Maintenance Dollars

Posted on Wed, May 10, 2017

Cities all over Texas are beginning their annual budget cycle in order to be able to pass a balanced budget by the end of September. Public Works officials have identified their street maintenance priorities and are preparing to justify their budget to the City Councils. There is never enough money or resources to satisfy all the needs of a City or County. But what if I told you there was a way to stretch your street maintenance dollars. What if I told you that the streets that you repave this year can get 50 percent or more life expectancy and at the same time, be more rut and crack resistant extending the normal degradation of the pavement condition index.

The innovative and forward thinking officials at the City of Seguin asked that question and have taken the first step to armor their roads. City Engineer, Joe Ramos, PE, and Public Works Manager, John Donnelly asked the right questions and got the right answers.

Read More

Tags: street maintenance, aramid fibers, asphalt paving, Ace Fibers Asphalt

Stabilized Construction Exits - The Right Way

Posted on Wed, May 03, 2017

Stabilized Construction Exits (SCE)

One of the most important tools in preventing stormwater pollution from a construction site is the Stabilized Construction Exit (SCE).  Also referred as - Stabilized Construction Access, Construction Exit, Exit, Rock Exit, etc. These can be made of various materials, however, the majority are done with rock.  The specification for a rock exit is very specific. This type of BMP, if not done per spec and not maintained regularly, is one of the major citizen complaints that initiates a visit by a city or MS4 inspector.  This ultimately could lead to violation of compliance and costly fines.  The spec is as follows:

 

Read More

Tags: swppp, stabilized construction exit, rock exit, construction site compliance, SCE

Low Impact Design and Site Feasibility

Posted on Fri, Apr 28, 2017

The stormwater and Civil Engineering Industry is one of the most highly regulated markets in the United States. Recently, within that market, one particular topic of discussion consistently comes up. - That their simply are no easy sites left when it comes to civil design and the stormwater regulations associated with it.

This isn't entirely true. There are various stormwater technologies that actually make regulations work in favor of the developer. Low Impact Development (LID) is not only a more environmentally conscious solution to stormwater civil design, it can also be a more cost-effective solution.

For instance, it may allow a developer to take a space with site constraints, that would have been too expensive to develop or simply not feasible using traditional methods and transform the site into a viable, economical, and environmentally conscious showcase for the developer.

Read More

Tags: Development, Low Impact Development, stormwater management, detention storage requirement, civil design, stormwater regulations

Permeable Pavement: Always Care About Value - Not About Price

Posted on Mon, Apr 24, 2017

When it comes to the diversity of permeable pavement products on the market, it can be difficult to decide which one is best for your project. The client usually wants the cheapest option, leaving the designer in situation where performance and cost conflicts. In Texas and Louisiana the cheapest upfront option ends up being “plastic grid” permeable pavements. The concept behind this type of system is that the plastic grid provides structural support, while the voids are filled with angular chip rock. The grid structure filled with the stone provides the structural support for the traffic, while allowing stormwater to infiltrate the voids into a stone subbase. More often than not, there is an underdrain that conveys the water to the storm sewer system. The end result looks very similar to a gravel parking lot.

Read More

Tags: permeable pavements,, infiltration rate, infiltration test, ASTC C1701, detention volume, urban conservancy, stormwater best management practices, front yard initiative

Green Infrastructure: More than Stormwater Quality

Posted on Mon, Apr 17, 2017

Many local, state and federal regulators have looked at green infrastructure (GI) as a great way to deal with their stormwater quality requirements.  In doing so, they have put GI in a box, forgetting the reason the movement began in the first place; to mimic predevelopment hydrology. 

Read More

Tags: Green Infrastructure, Biofiltration System, land development, predevelopment hyrdology, detention storage requirement

Why you shouldn't use Silt Fence for Inlet Protection

Posted on Thu, Mar 23, 2017

Inlet protection barriers are necessary to filter silt and sediment from stormwater before entering the drainage system. When the wrong BMP is used and fails, not only are you in direct violation of the Clean Water Act, but it often leads to flooding; which can delay construction activity, and cause costly maintenance regimens.

Read More

Tags: BMPs, silt fence, swppp, stormwater pollution prevention, inlet protection barriers, IPB, good bmps, inlet protection, construction site bmp, job site compliance

Case Study: Sand Filter Compliance in Austin, TX

Posted on Mon, Mar 20, 2017

A commonly used stormwater quality device utilized in the Austin area is a Sand filter.  These Sand filters are specified on all types of facilities and consist of basins that capture and filter stormwater runoff through a bed of sand in the floor of the system. They are employed to help remove pollutants from stormwater runoff before it enters surface or underground water conveyances. In order for a sand filter to work properly, it is imperative that they be consistently maintained.

Read More

Tags: stormwater compliance, stormwater basins, Sand Filter, sand filter maintenance, sand filter compliance, sediment and vegetation in sandfilter, detention basin, detention basin maintenance, gaps in expansion joints

Harris County Stormwater Permit Changes - The New Pieces to the Puzzle

Posted on Wed, Mar 15, 2017

Many of us have been caught off guard at some point in our lives when it comes to paperwork, perhaps waiting in line for hours just to find out you’re missing one important document.  The realization of having to start over is frustrating, at best, and as it relates to a property’s Stormwater Quality permit, being caught off guard would be inconvenient and could be costly.   Knowing in advance what is needed need can save valuable time, resources, and money.

Read More

Tags: stormwater quality, stormwater quality permits, stormwater quality in harris county, Stormtrooper, Stormceptor, harris county stormwater quality requirements, stormwater feature, ADS